Skip to content
Guide

What Is a Gas Diffusion Electrode?

A gas diffusion electrode, or GDE, is a porous electrode that brings a gas straight to the catalyst from one side while the electrolyte touches it from the other. This reaches far higher current densities than a gas dissolved in liquid, so GDEs are used in fuel cells, electrolyzers and CO₂ reduction cells.

The layers of a gas diffusion electrode

What each layer of a GDE does
LayerWhat it does
Gas diffusion layerA porous carbon paper or cloth that spreads the gas and conducts electrons
Microporous layerA fine layer that smooths the surface and manages water
Catalyst layerWhere the reaction happens, where gas, electrolyte and catalyst meet

Why CO₂ reduction uses a gas diffusion electrode

CO₂ dissolves poorly in water, so in an H-cell the current is limited by how fast it reaches the catalyst. A gas diffusion electrode feeds CO₂ as a gas, so the path to the catalyst is very short.

This is why gas diffusion flow cells reach current densities that an H-cell cannot.

What goes wrong: flooding

  • Flooding happens when electrolyte fills the pores and blocks the gas.
  • Common causes are a pressure imbalance, a hydrophilic surface and salt building up in the pores.
  • Watch the gas side for liquid, and for a fall in the product you want.

How to choose a gas diffusion layer

  • Thickness and porosity affect how easily the gas passes.
  • A hydrophobic treatment, often PTFE, helps resist flooding.
  • A microporous layer gives a smoother base for the catalyst.
  • The material must survive your electrolyte and potential.

Frequently asked questions

What is the difference between a GDE and a GDL?

The gas diffusion layer is the porous support. A gas diffusion electrode is that support with a catalyst layer on it.

Can I use a gas diffusion electrode in an H-cell?

Not as intended. It needs a gas chamber behind it, which is what a gas diffusion flow cell provides.

See also