Services

What we do

Customized, turnkey R&D for metallurgy & materials. Every client is unique, so we tailor each solution to your requirement — from lab-scale prototype to full industrial scale.

How we work

From lab-scale prototype to industrial scale

Develop

We build and validate a lab-scale prototype tailored to your specific requirement.

Refine

We optimize cost, quality and process through testing, benchmarking and simulation.

Scale

We take the validated process through to reliable industrial-scale production.

In detail

Every service, explained

Drag through the deck — eight disciplines, every engagement runs lab bench to plant floor.

01 / 08
Product & Process Development
We take your product or process from concept and a lab-scale prototype through pilot runs to a repeatable industrial route. Each step is de-risked with real test data, so what leaves our lab is a specification your plant can run.
- Lab-scale prototyping
- Pilot-run validation
- Process route design
- Industrial scale-up transfer
A production-ready process proven from lab to plant
Get a quote
02 / 08
Applied Research & Consultancy
When a process problem stalls your line and in-house trials have run dry, we take it end to end — feasibility scoping, a designed experimental program, and root-cause analysis. You get costed recommendations and hands-on support until the fix holds at scale.
- Feasibility & literature scoping
- DOE experimental program
- Root-cause investigation
- Costed recommendations
A fix that holds where in-house trials stalled
Get a quote
03 / 08
Process & Quality Improvement
When your line loses yield to cracks, porosity, or inclusions, we section and characterize the failed parts to trace each defect to its source. Then we map governing parameters, tighten the process window, and add checks that keep it from returning.
- Fractography & defect metallography
- Inclusion cleanliness rating
- Process-window mapping
- SPC yield tracking
Fewer defects, higher yield, and a controlled process window
Get a quote
04 / 08
Product Benchmarking
We put your product and its competitors on the same bench — teardown, composition analysis, and matched property testing — so every claimed difference is measured, not assumed. You learn where your material leads, where it trails, and the real opening to differentiate.
- Competitor product teardown
- OES/XRF composition analysis
- Side-by-side property testing
- Gap & differentiation analysis
A measured scorecard of where you lead and lag
Get a quote
05 / 08
Microstructure Control & Heat Treatment
We design and validate heat-treatment cycles — annealing, quenching, tempering, aging and solutionizing — to tune the phases, grain size and precipitates that set your properties. You get a repeatable schedule, proven on micrographs and hardness data, for your target property balance.
- TTT/CCT cycle design
- Quench & temper optimization
- Precipitate & aging control
- Grain-size & texture control
A validated heat-treatment schedule ready for production
Get a quote
06 / 08
Modeling & Simulations
We model your process and product before any metal is poured — CALPHAD phase prediction, thermal and stress FEA, and solidification simulation — to expose defects and property trade-offs on screen. You reach the plant with narrowed parameters and far fewer physical trials.
- CALPHAD phase prediction
- Thermal & stress FEA
- Casting & solidification simulation
- Materials property modeling
A design proven before the first melt
Get a quote
07 / 08
Materials Testing & Characterization
We characterize your material across mechanical testing, microstructure imaging, phase identification, and compositional analysis in one workflow. Every test ties back to a data-backed report you can act on — properties measured, structure resolved, and failures explained.
- Tensile, hardness, impact
- SEM & optical microstructure
- XRD phase identification
- EDS & DSC/TGA analysis
A data-backed report on every property and phase
Get a quote
08 / 08
Materials Processing Facilities
Run your material through our in-house processing line — melting and casting, powder metallurgy and sintering, rolling and thermo-mechanical forming, and coating or synthesis rigs. We fabricate your samples, tune the route, and scale a proven process from bench to pilot line.
- Melting & casting furnaces
- Powder metallurgy & sintering
- Rolling & thermo-mechanical forming
- Coating & synthesis lines
Fabricated prototypes and a pilot-ready processing route
Get a quote